Home›Free tools›Free trading profit calculator (P&L)

Free trading profit calculator (P&L)

This P&L calculator gives you the result of a closed trade: gross profit or loss, fees, net result, and the result in R if you enter your stop. Enter the side, the entry and exit prices, the quantity and the fees. Free, instant, no sign-up.

In short A trade's P&L, short for profit and loss, is the money that trade made or cost. On a long trade it equals (exit price − entry price) × quantity × multiplier, minus fees. On a short trade the difference runs the other way: entry price − exit price. The multiplier is 1 on a stock and the point value on a futures contract.

Amounts come out in the instrument's quote currency: dollars on EUR/USD, on gold or on a CME contract. The multiplier is preset by market and stays editable.

Three worked examples: a stock, a future and forex

The same calculation applies to every market. Only the multiplier changes. Here are three closed trades, calculated step by step.

Buying 200 shares

  • Entry 50, exit 54.20: a move of +4.20 per share.
  • Gross P&L: 4.20 × 200 × 1 = +840.
  • Fees: 3, so a net P&L of +837.
  • Stop at 48.60: a risk of 1.40 × 200 = 280, so a result of +2.99 R.

Selling 3 MES contracts

  • Sold at 6,010, bought back at 5,996: a move of +14 points, since price fell.
  • Gross P&L: 14 × 3 × 5 = +210 dollars.
  • Fees: 7.50, so a net P&L of +202.50 dollars.
  • Stop at 6,018: a risk of 8 × 3 × 5 = 120, so +1.69 R.

Buying 0.5 lot of EUR/USD

  • Entry 1.0850, exit 1.0815: a move of −0.0035, which is −35 pips.
  • Gross P&L: −0.0035 × 0.5 × 100,000 = −175 dollars.
  • Fees: 3.50, so a net P&L of −178.50 dollars.
  • Stop at 1.0815: the trade was closed at its stop. It loses −1.02 R because of fees.
The method

How to calculate a trade's P&L

1

1. Measure the price move in the trade's direction

On a buy, the move is exit price − entry price. On a sell, it is entry price − exit price. A positive move is a gain, a negative one a loss. This is the only step where the side of the trade matters.

2

2. Turn the move into money

Multiply the move by the quantity, then by the multiplier. The multiplier is 1 on a stock or a crypto, 100,000 on a standard forex lot, and the point value on a future: 5 dollars on the MES, 50 on the ES. That gives you the gross P&L.

3

3. Subtract fees, then read the result in R

Net P&L = gross P&L − commissions − swap. If you enter your stop, the calculator divides the net P&L by the risk taken to the stop. The result in R tells you how many times your risk the trade made or cost.

The full formula: net P&L = (exit − entry) × quantity × multiplier − fees, on a buy. On a sell, (entry − exit) replaces (exit − entry). And the result in R: net P&L ÷ (stop distance × quantity × multiplier).

The multiplier, market by market

The multiplier turns one point of price into money, for one unit of quantity. It is the only setting that changes from one market to the next. It also explains most P&L figures worked out wrong by hand.

MarketMultiplierFor a +100 gain
Stocks and ETFs1 per share+1 on 100 shares
Spot crypto1 per unit+500 on 0.2 BTC
Forex100,000 per lot+10 pips on 1 lot
Gold XAUUSD100 per 100 oz lot+1 dollar on 1 lot
MES future5 dollars per point+20 points on 1 contract
ES future50 dollars per point+2 points on 1 contract
MNQ future2 dollars per point+50 points on 1 contract
NQ future20 dollars per point+5 points on 1 contract

Quantity is entered in the market's own unit: shares, units, lots or contracts. On gold and on CFDs, lot size depends on the broker. Check it in the instrument's specification before trusting the result. On a future, the multiplier is the point value: tick value divided by tick size. The futures calculator gives it contract by contract. On forex, the pip value calculator gives the value of one pip for your size.

Why your P&L differs from your broker's

If your statement does not show the same figure, look first at these five causes.

  • Fees counted twice, or not at all. A commission is often charged on entry and on exit. Enter the round-trip total, once.
  • Swap. A position held overnight pays or receives interest. It adds to the trade's fees.
  • Partial exits. A trade closed in several pieces has several exit prices. Calculate each piece separately, or use the exit price averaged by quantity.
  • The executed price. The price on your order is not always the fill price. Slippage shows on the statement, not on the chart.
  • Account currency. A trade on EUR/USD earns dollars. A euro account converts them at the day's rate. That rate moves.

Open P&L, on a position still running, follows the same formula with the current price in place of the exit price. It only becomes realised at the close. The P&L guide explains the difference.

P&L in money, and the same trade in R

A P&L in money depends on position size. A gain of 200 does not mean the same thing on a 2,000 account and on a 200,000 account. The result in R removes that effect: it divides the net P&L by the risk taken to the stop.

Net P&L ÷ riskResult in RReading
+300 ÷ 100+3.00 Rthe trade made three times the risk
+50 ÷ 100+0.50 Ra winner, closed before the target
−100 ÷ 100−1.00 Rthe planned loss, stop respected
−104 ÷ 100−1.04 Rstop hit, plus fees
−180 ÷ 100−1.80 Ra bigger loss than planned: stop moved or slippage

A loss of −1 R is a trade that worked as planned. A run of losses beyond −1 R is a signal. Either the stop is not respected, or fees weigh more than you think. The risk reward calculator prepares that R before entry. The win rate calculator tells you whether your series of R holds over time.

What Tradoshi calculates on its own from your trades

This calculator counts one trade from the prices you type in. The Tradoshi journal counts all your trades from the executed prices. You connect your broker or import your statement. There is then nothing to type by hand.

  • The net P&L of every trade, with commissions and swap deducted, and the gross P&L and total cost next to it.
  • The result in R of every trade whose stop is recorded, and the average realised R over the period.
  • P&L by day, in a calendar, and P&L by month.
  • Win rate, profit factor and expectancy per trade, recalculated with every closed trade.

The Reports screen breaks that P&L down by symbol, weekday, entry hour, side, account or market session. You see which market pays and which one costs, fees included.

Frequently asked questions

How do you calculate the P&L of a trade?

On a buy, P&L = (exit price − entry price) × quantity × multiplier − fees. On a sell, the difference runs the other way. With 200 shares bought at 50 and sold at 54.20, and 3 in fees, the net P&L is 837. This P&L calculator runs that calculation and adds the result in R.

What is the difference between gross and net P&L?

Gross P&L is the result of the price move alone. Net P&L subtracts commissions and swap. Net is what reaches your account. It is also what decides whether a trade is a winner. A small gross gain can turn into a net loss.

How do you calculate P&L on a short trade?

You reverse the difference: P&L = (entry price − exit price) × quantity × multiplier − fees. A sale at 6,010 bought back at 5,996 gains 14 points. On 3 MES contracts at 5 dollars a point, that is 210 dollars gross. Choose Sell in the calculator: it reverses the difference for you.

What is the R multiple of a trade?

It is the net P&L divided by the risk taken to the stop. A trade that gains 300 with a risk of 100 is worth +3 R. A trade closed at its stop is worth about −1 R, a little more once fees are added. R lets you compare trades of different sizes.

How do you calculate the P&L of a forex trade?

Multiply the price move by the number of lots, then by 100,000, the size of a standard lot. A buy of 0.5 lot of EUR/USD from 1.0850 to 1.0815 loses 175 dollars gross. The result comes out in the quote currency, here the dollar. A euro account then converts it.

Is this P&L calculator free?

Yes, fully free and no sign-up. The calculation runs in your browser: the numbers you enter are sent nowhere. The Tradoshi app goes further by calculating the net P&L of all your imported trades, in money and in R, by day, by symbol and by session.

Let Tradoshi calculate the P&L of every trade.

Permanent free plan, no credit card.

Start for free